Blog

What are the precautions for using ultrasonic spot welding machine?

As a kind of mechanical equipment, the ultrasonic spot welder must be operated according to the correct operating steps during use to ensure the efficiency of the welding operation and reduce the loss of the equipment. At the same time, you must also learn the precautions for use to avoid unnecessary accidents and delays in production due to improper operation. So, what are the precautions for using ultrasonic spot welding machine? The following ultrasonic manufacturer Wolkon reveals the secrets for you.

1. Before use, train relevant machine operators to give them a comprehensive understanding of the equipment.

2. Place the equipment in a clean, well-temperature, and ventilated environment to avoid dusty, corrosive, high-temperature or humid working environments.

3. Before use, check the three-pin plug of the power supply, phase wire C, neutral wire N, and ground wire G to ensure reliable grounding during use.

4. Connect the circuit according to the rated voltage of the equipment. During use, if the voltage fluctuates and the fluctuation is large, a voltage stabilizer must be installed.

5. During welding, if the pneumatic components work unstable, the air pressure can be adjusted to make the pneumatic components run smoothly.

6. After the welding operation is completed, turn off the power and gas source in time to ensure that all indicator lights are extinguished; then clean the equipment to ensure that the workbench is clean and tidy.

• Previous: Discuss the technological innovation and quality improvement of ultrasonic welding machines dedicated to the medical device industry
• Next: Ultrasonic fusion line design of ultrasonic plastic welding machine